Name: 
 

Fiber U Fiber Optic Restoration



True/False
Indicate whether the statement is true or false.
 

 1. 

Marker tape should be buried right above the fiber optic cable or conduit to make the cable or conduit  easy to find.
 

 2. 

Service loops are convenient - and often necesssary - for splicing during installation but can also provide extra cable that easies cable repair for restoration.
 

 3. 

In case of a fiber optic cable problem, the first thing to check is the connectors.
 

Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 4. 

Underground fiber optic cables should be buried _________ deep unless the topsoil is not deep enough.
a.
30cm / 12 inches
b.
1 meter / 3 feet
c.
Deeper than other utilities in the area
d.
Close enough to the surface to be easily located
 

 5. 

Fiber optic cables installed by microtrenching are typically buried _________ deep.
a.
30cm / 12 inches
b.
1 meter / 3 feet
c.
Deeper than other utilities in the area
d.
As deep as the boring tool can reach.
 

 6. 

Buried fiber optic cables should _______ to make cable location obvious and easy to find.
a.
Be marked by above-ground markers or signs
b.
Have marker tape above the cable or conduit
c.
Have good GIS data on the location
d.
All of the above
 

 7. 

The most important thing to speed troubleshooting and repair is having good ______.
a.
Documentation
b.
Spares
c.
Tools and test equipment
d.
Trained techs
 

 8. 

Leftover components after a cable plant installation like cable and splice closures shoul be __________.
a.
Recycled
b.
Discarded
c.
Sold
d.
Saved for restoration
 

 9. 

The quickest way to get a communications network back online is to _________.
a.
Splice in a new cable
b.
Use satellite links
c.
Switch to a backup link or cable
d.
Run a temporary cable
 

 10. 

The fiber optic tester that finds problems like breaks or high loss in the cable plant is the ________.
a.
OLTS
b.
Power meter
c.
OTDR
d.
VFL
 

Multiple Response
Identify one or more choices that best complete the statement or answer the question.
 

 11. 

Cable being pulled into conduit can be damaged if installers  ______.
 a.
Exceed limits on the cable pulling tension
 b.
Don’t allow for slack
 c.
Roll cable directly off the reel
 d.
Bend the cable around too small a radius like a pulley
 



 
Check Your Work     Start Over